Standard cross-reference

Bolts

Carriage BoltDIN 603ISO 8678Head height and head diameter at 6 sizes, plus small details

Hexagon Flange Bolt with Serrated FlangeDIN 6921ISO 4162Wrench size at 5 sizes; head height at 7 sizes, plus small details

Hexagon Head Bolt Partial ThreadDIN 931ISO 4014GB/T 5782Wrench size at M10, M12, M14 and M22

Hex Bolt, Fine Pitch, Partial ThreadDIN 960ISO 8765Wrench size at M10, M12, M14 and M22; head height at 8 sizes

Fully Threaded Hex BoltDIN 933ISO 4017GB/T 5783Wrench size at M10, M12, M14 and M22

Socket screws

Countersunk Socket Head ScrewDIN 7991ISO 10642Head height and head diameter at 10 sizes

Hexagon Socket Head Cap ScrewDIN 912ISO 4762No difference

Set screws

Hexagon Socket Set Screw, Cup PointDIN 916ISO 4029No difference

Hexagon Socket Set Screw, Flat PointDIN 913ISO 4026No difference

Socket Set Screw Cone PointDIN 914ISO 4027No difference

Dog Point Set ScrewDIN 915ISO 4028No difference

Nuts

Serrated Hex Flange NutDIN 6923ISO 4161No difference

Hex NutDIN 934ISO 4032Wrench size at M10, M12, M14 and M22; nut height at 15 sizes

Hexagon Thin Nut, ChamferedDIN 439ISO 4035Wrench size at M10, M12, M14 and M22

All-Metal Prevailing Torque NutDIN 980ISO 7042Wrench size at M10, M12 and M14; nut height at 10 sizes, plus small details

Nylon Insert Lock NutDIN 985ISO 10511Wrench size at M10, M12 and M14; nut height at 10 sizes

High Nylon Insert Lock NutDIN 982ISO 7040Wrench size at M10, M12 and M14; nut height at 9 sizes, plus small details

Washers

Plain WasherDIN 9021ISO 7093-1Hole size at M18, M20 and M24; thickness at M5

Plain WasherDIN 125 DIN 125-1 DIN 125-2ISO 7089Hole size at 8 sizes; thickness at 5 sizes

Plain WasherDIN 433ISO 7092Outside diameter at M36; thickness at M18

Machine screws

Phillips Countersunk Head Machine ScrewDIN 965ISO 7046Head height at 6 sizes; head diameter at 7 sizes

Phillips Pan Head Machine ScrewDIN 7985ISO 7045Head height at M2.5, M3.5 and M5; head diameter at M3 and M5

Slotted Cheese Head Machine ScrewDIN 84ISO 1207Head height at M1.6, M2 and M2.5

Slotted Countersunk Head Machine ScrewDIN 963ISO 2009Head height at 6 sizes; head diameter at 7 sizes, plus small details

Slotted Pan Head Machine ScrewDIN 85ISO 1580No difference

Tapping screws

Phillips Countersunk Self-Tapping ScrewDIN 7982ISO 7050GB/T 846Head height and head diameter at 6 sizes, plus small details

Phillips Pan Head Tapping ScrewDIN 7981ISO 7049GB/T 845Head height at 6 sizes; head diameter at 5 sizes, plus small details

Phillips Raised Countersunk Tapping ScrewISO 7051GB/T 847Same part

Hex Flange Head Tapping ScrewISO 10509GB/T 16824.2Same part

Hex Head Tapping ScrewISO 1479GB/T 5285No difference

Hex Washer Head Tapping ScrewDIN 6928ISO 7053GB/T 16824.1Same part

Hexalobular Socket Countersunk Head Tapping ScrewISO 14586GB/T 2670.2No difference

Hexalobular Socket Pan Head Tapping ScrewISO 14585GB/T 2670.1No difference

Hexalobular Socket Raised Countersunk Head Tapping ScrewISO 14587GB/T 2670.3No difference

Slotted Countersunk Head Tapping ScrewISO 1482GB/T 5283No difference

Slotted Pan Head Tapping ScrewISO 1481GB/T 5282No difference

Slotted Raised Countersunk Head Tapping ScrewISO 1483GB/T 5284No difference

Tapping screw and washer assemblies with plain washersISO 10510GB/T 9074.18Same part

Drilling screws

Phillips Countersunk Self-Drilling ScrewDIN 7504 OISO 15482GB/T 15856.2No difference

Phillips Pan Head Self-Drilling ScrewDIN 7504 MISO 15481GB/T 15856.1No difference

Phillips Raised Countersunk Self-Drilling ScrewDIN 7504 RISO 15483GB/T 15856.3No difference

Hex Washer Head Self-Drilling Screw with EPDM WasherDIN 7504 KISO 15480GB/T 15856.5Same part

Pins

Grooved Pin, Full Length Parallel GroovedDIN 1473ISO 8740No difference

Cotter PinDIN 94ISO 1234Eye diameter at 20 mm

Threaded rod

Threaded StudDIN 975 DIN 976-1No difference