Fully Threaded Hex Bolt

3D

A hex head bolt threaded right up to the head, so the nut can be run all the way down without bottoming on an unthreaded shank. Tighten with a standard spanner or socket. Used in machinery, steel structures and equipment mounting.

Matching components

Hex NutDIN 934 · M3–M36Nylon Insert Lock NutDIN 985 · M4–M36Serrated Hex Flange NutDIN 6923 · M5–M16Flat WasherDIN 125 · M3–M36Heavy Duty Flat WasherDIN 7349 · M3–M24Split Spring WasherDIN 127 · M3–M36

Questions

DIN 933 has been withdrawn — is ISO 4017 the same part?

In the sizes we list, only the wrench size differs: M10 is 17 mm on DIN 933 against 16 mm on ISO 4017 and M12 is 19 mm against 18 mm. M3, M4, M5, M6, M8, M16, M20 and M24 are the same in both. We still make it to the DIN 933 table for existing drawings.

Why is there no hot-dip galvanized option below M8?

The zinc layer is too thick for smaller threads, so hot-dip galvanizing starts at M8.

Full thread or partial thread?

Full thread suits tapped holes and short joints where the nut runs up to the head. Partial thread keeps a smooth shank across the joint, which is stronger against side load and lines the parts up more accurately.

Order assurance

Reports & inspection

• EN 10204 3.1 material certificate
• Dimensional inspection report
• Certificate of conformity
• Mechanical test report
• Chemical analysis report
• Coating inspection report
• Batch and lot traceability

Packaging & delivery

• Bulk carton packing
• Small boxes with outer cartons
• Palletized shipment
• Fumigation-free pallets
• Inner poly bags
• Buyer branding and labels

Related products

Partial Thread Hex BoltDIN 931 · M5–M24Fine Pitch Full Thread Hex BoltISO 8676 · M8–M24Grade C Full Thread Hex BoltISO 4018 · M6–M24Fine Pitch Partial Thread Hex BoltDIN 960 · M8–M24Grade C Partial Thread Hex BoltISO 4016 · M6–M24Inch Hex Cap ScrewASME B18.2.1 · 1/4-20UNC–7/8-9UNC