TaurusFix
WhatsAppsales@taurusfix.com
Quote list

Hexagon Full Nut

A hex nut with full thread engagement for standard bolted joints. Its height provides enough threads to develop the full strength of a matching bolt, so the bolt fails before the nut strips. Tighten with a wrench or socket on the hex flats. Used in machinery, structures, and equipment where a standard nut is required.

In stockShips within 3 working daysMade to orderShips within 15 working days

M12 × 1.7522 variantss19max.e21.1min.m10ISO 4032: s = 18 mm, e ≥ 20.03 mm, m = 10.8 mm
SizeMaterialGradeFinishStockMOQpcs≈ kg/ 1,000 pcsQuantitypcs
M12Stainless SteelA2-70PassivatedIn stock1,00017.48
M12Stainless SteelA2-70PlainIn stock1,00017.48
M12Stainless SteelA4-80PassivatedIn stock1,00017.48
M12Stainless SteelA4-80PlainIn stock1,00017.48
M12Carbon SteelClass 8PlainIn stock1,00017.30
M12Carbon SteelClass 8Zinc PlatedIn stock1,00017.37
M12Carbon SteelClass 8Hot Dip GalvanizedIn stock1,00017.81
M12Carbon SteelClass 8DacrometIn stock1,00017.34
M12Carbon SteelClass 8BlackenedIn stock1,00017.30
M12Carbon SteelClass 8PhosphateIn stock1,00017.30
M12Carbon SteelClass 10PlainIn stock1,00017.30
M12Carbon SteelClass 10Zinc PlatedIn stock1,00017.37
M12Carbon SteelClass 10Hot Dip GalvanizedIn stock1,00017.81
M12Carbon SteelClass 10DacrometIn stock1,00017.34
M12Carbon SteelClass 10BlackenedIn stock1,00017.30
M12Carbon SteelClass 10PhosphateIn stock1,00017.30
M12Carbon SteelClass 6PlainIn stock1,00017.30
M12Carbon SteelClass 6Zinc PlatedIn stock1,00017.37
M12Carbon SteelClass 6Hot Dip GalvanizedIn stock1,00017.81
M12Carbon SteelClass 6DacrometIn stock1,00017.34
M12Carbon SteelClass 6BlackenedIn stock1,00017.30
M12Carbon SteelClass 6PhosphateIn stock1,00017.30

22 combinations shown

Matching components

Fully Threaded Hex Bolt DIN 933Full Thread Hex BoltDIN 933 · M3–M24Hexagon Head Bolt Partial Thread DIN 931Partial Thread Hex BoltDIN 931 · M5–M24Stud Bolt, Metal End 1d DIN 938Stud Bolt, Metal End 1dDIN 938 · M6–M20Threaded Rod DIN 975Threaded RodDIN 975 · M6–M36Flat Washer, Form A DIN 125Flat WasherDIN 125 · M3–M36Heavy Flat Washer for Spring Pin Bolts DIN 7349Heavy Duty Flat WasherDIN 7349 · M3–M24

Questions

Why is there no hot-dip galvanized option below M8?

The zinc layer is too thick for smaller threads, so hot-dip galvanizing starts at M8.

Order assurance

Reports & inspection

  • EN 10204 3.1 material certificate
  • Dimensional inspection report
  • Certificate of conformity
  • Mechanical test report
  • Chemical analysis report
  • Coating inspection report
  • Batch and lot traceability

Packaging & delivery

  • Bulk carton packing
  • Small boxes with outer cartons
  • Palletized shipment
  • Fumigation-free pallets
  • Inner poly bags
  • Buyer branding and labels

Related products

Hex Nut, Style 2 (High) ISO 4033High Hex NutISO 4033 · M5–M36Hex Nut, Fine Pitch ISO 8673Fine Pitch Hex NutISO 8673 · M8–M24Hex Nut, Product Grade C ISO 4034Grade C Hex NutISO 4034 · M6–M36Hex Nut ASME B18.2.2Inch Hex NutASME B18.2.2 · 1/4-20UNC–7/8-9UNCHexagon Thin Nut, Chamfered DIN 439Chamfered Thin Hex NutDIN 439 · M6–M36Hex Nut, Height 1.5d DIN 6330Tall Hex NutDIN 6330 · M6–M24
Quote list0 lines

Your list is empty.