Reports & inspection
- EN 10204 3.1 material certificate
- Dimensional inspection report
- Certificate of conformity
- Mechanical test report
- Chemical analysis report
- Coating inspection report
- Batch and lot traceability
Hex Nut, Product Grade C
A hex nut with the widest tolerances, intended for structural steelwork and general construction where precise alignment is not required. It is tightened with a standard wrench or socket. Use it with a bolt of matching strength so the bolt fails before the nut strips. Do not use in machined assemblies that need close fits.
In stockShips within 3 working daysMade to orderShips within 15 working days
M6 × 1Carbon SteelClass 55 variantss10max.e10.89min.m6.4 | ||||||
|---|---|---|---|---|---|---|
| Size | Finish | Stock | MOQpcs | ≈ kg/ 1,000 pcs | Quantitypcs | |
| M6 | Zinc Plated | In stock | 2,000 | 3.24 | ||
| M6 | Dacromet | In stock | 2,000 | 3.23 | ||
| M6 | Blackened | In stock | 2,000 | 3.21 | ||
| M6 | Phosphate | In stock | 2,000 | 3.21 | ||
| M6 | Plain | In stock | 2,000 | 3.21 | ||
5 combinations shown
Matching components
Questions
Why is there no hot-dip galvanized option below M8?
The zinc layer is too thick for smaller threads, so hot-dip galvanizing starts at M8.
Order assurance
Packaging & delivery
- Bulk carton packing
- Small boxes with outer cartons
- Palletized shipment
- Fumigation-free pallets
- Inner poly bags
- Buyer branding and labels
