Reports & inspection
- EN 10204 3.1 material certificate
- Dimensional inspection report
- Certificate of conformity
- Mechanical test report
- Chemical analysis report
- Coating inspection report
- Batch and lot traceability
Dowel Pin, Unhardened
A parallel pin with a uniform diameter along its length, used to align two parts precisely. It is pressed into a reamed hole with a hammer or press, and is common in machine tools, jigs, fixtures, and moulds.
In stockShips within 3 working daysMade to orderShips within 15 working days
2.5 mm18 mm4 variantsc0.4Diameter Tolerancem6 · m6 interference/locatingLength Limit (min)17.5Length Limit (max)18.5 | |||||||
|---|---|---|---|---|---|---|---|
| Lengthmm | Material | Finish | Stock | MOQpcs | ≈ kg/ 1,000 pcs | Quantitypcs | |
| 18 | Stainless Steel | Passivated | In stock | 3,000 | 0.70 | ||
| 18 | Stainless Steel | Plain | In stock | 3,000 | 0.70 | ||
| 18 | Carbon Steel | Plain | In stock | 3,000 | 0.69 | ||
| 18 | Carbon Steel | Zinc Plated | In stock | 3,000 | 0.70 | ||
4 combinations shown
Questions
Hardened or unhardened dowel pin?
Hardened pins are hardened right through and ground to a close size, for positions that see wear or heavy side load. Unhardened pins suit lighter duty.
Order assurance
Packaging & delivery
- Bulk carton packing
- Small boxes with outer cartons
- Palletized shipment
- Fumigation-free pallets
- Inner poly bags
- Buyer branding and labels
