Threaded Stud

A rod threaded along its whole length and cut to a set length, used as a stud with a nut on each end. It is installed by threading one end into a tapped hole or anchor, then securing the joint with a nut on the other end, tightened with a wrench. Typical uses include flanges, anchors and through-bolted joints.

In stockShips within 3 working daysMade to orderShips within 15 working days

M4 × 0.728 variants
Lengthmm	Material	Grade	Finish		Stock	MOQpcs	≈ kg/ 1,000 pcs	Quantitypcs
50	Carbon Steel	Class 4.8	Zinc Plated		In stock	100	3.91
	50	Carbon Steel	Class 4.8	Dacromet		In stock	100	3.90
	50	Carbon Steel	Class 4.8	Blackened		In stock	100	3.88
	50	Carbon Steel	Class 4.8	Phosphate		In stock	100	3.88
	50	Carbon Steel	Class 4.8	Plain		In stock	100	3.88
	50	Carbon Steel	Class 8.8	Zinc Plated		In stock	100	3.91
	50	Carbon Steel	Class 8.8	Dacromet		In stock	100	3.90
	50	Carbon Steel	Class 8.8	Blackened		In stock	100	3.88
	50	Carbon Steel	Class 8.8	Phosphate		In stock	100	3.88
	50	Carbon Steel	Class 8.8	Plain		In stock	100	3.88
	50	Stainless Steel	A2-70	Plain		In stock	100	3.92
	50	Stainless Steel	A2-70	Passivated		In stock	100	3.92
	50	Stainless Steel	A4-80	Plain		In stock	100	3.92
	50	Stainless Steel	A4-80	Passivated		In stock	100	3.92
60	Carbon Steel	Class 4.8	Zinc Plated		In stock	100	4.70
	60	Carbon Steel	Class 4.8	Dacromet		In stock	100	4.68
	60	Carbon Steel	Class 4.8	Blackened		In stock	100	4.66
	60	Carbon Steel	Class 4.8	Phosphate		In stock	100	4.66
	60	Carbon Steel	Class 4.8	Plain		In stock	100	4.66
	60	Carbon Steel	Class 8.8	Zinc Plated		In stock	100	4.70
	60	Carbon Steel	Class 8.8	Dacromet		In stock	100	4.68
	60	Carbon Steel	Class 8.8	Blackened		In stock	100	4.66
	60	Carbon Steel	Class 8.8	Phosphate		In stock	100	4.66
	60	Carbon Steel	Class 8.8	Plain		In stock	100	4.66
	60	Stainless Steel	A2-70	Plain		In stock	100	4.71
	60	Stainless Steel	A2-70	Passivated		In stock	100	4.71
	60	Stainless Steel	A4-80	Plain		In stock	100	4.71
	60	Stainless Steel	A4-80	Passivated		In stock	100	4.71