Reports & inspection
- EN 10204 3.1 material certificate
- Dimensional inspection report
- Certificate of conformity
- Mechanical test report
- Chemical analysis report
- Coating inspection report
- Batch and lot traceability
Threaded Stud
A rod threaded along its whole length and cut to a set length, used as a stud with a nut on each end. It is installed by threading one end into a tapped hole or anchor, then securing the joint with a nut on the other end, tightened with a wrench. Typical uses include flanges, anchors and through-bolted joints.
In stockShips within 3 working daysMade to orderShips within 15 working days
M36 × 450 variants | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lengthmm | Material | Grade | Finish | Stock | MOQpcs | ≈ kg/ 1,000 pcs | Quantitypcs | |
| 50 | Carbon Steel | Class 8.8 | Zinc Plated | In stock | 50 | 344.32 | ||
| 50 | Carbon Steel | Class 8.8 | Hot Dip Galvanized | In stock | 50 | 346.68 | ||
| 50 | Carbon Steel | Class 8.8 | Dacromet | In stock | 50 | 344.17 | ||
| 50 | Carbon Steel | Class 8.8 | Blackened | In stock | 50 | 343.93 | ||
| 50 | Carbon Steel | Class 8.8 | Phosphate | In stock | 50 | 343.93 | ||
| 50 | Carbon Steel | Class 8.8 | Plain | In stock | 50 | 343.93 | ||
| 50 | Stainless Steel | A2-70 | Plain | In stock | 50 | 347.44 | ||
| 50 | Stainless Steel | A2-70 | Passivated | In stock | 50 | 347.44 | ||
| 50 | Stainless Steel | A4-80 | Plain | In stock | 50 | 347.44 | ||
| 50 | Stainless Steel | A4-80 | Passivated | In stock | 50 | 347.44 | ||
| 60 | Carbon Steel | Class 8.8 | Zinc Plated | In stock | 50 | 413.16 | ||
| 60 | Carbon Steel | Class 8.8 | Hot Dip Galvanized | In stock | 50 | 415.87 | ||
| 60 | Carbon Steel | Class 8.8 | Dacromet | In stock | 50 | 412.99 | ||
| 60 | Carbon Steel | Class 8.8 | Blackened | In stock | 50 | 412.72 | ||
| 60 | Carbon Steel | Class 8.8 | Phosphate | In stock | 50 | 412.72 | ||
| 60 | Carbon Steel | Class 8.8 | Plain | In stock | 50 | 412.72 | ||
| 60 | Stainless Steel | A2-70 | Plain | In stock | 50 | 416.93 | ||
| 60 | Stainless Steel | A2-70 | Passivated | In stock | 50 | 416.93 | ||
| 60 | Stainless Steel | A4-80 | Plain | In stock | 50 | 416.93 | ||
| 60 | Stainless Steel | A4-80 | Passivated | In stock | 50 | 416.93 | ||
| 80 | Carbon Steel | Class 8.8 | Zinc Plated | In stock | 50 | 550.55 | ||
| 80 | Carbon Steel | Class 8.8 | Hot Dip Galvanized | In stock | 50 | 553.96 | ||
| 80 | Carbon Steel | Class 8.8 | Dacromet | In stock | 50 | 550.34 | ||
| 80 | Carbon Steel | Class 8.8 | Blackened | In stock | 50 | 550.00 | ||
| 80 | Carbon Steel | Class 8.8 | Phosphate | In stock | 50 | 550.00 | ||
| 80 | Carbon Steel | Class 8.8 | Plain | In stock | 50 | 550.00 | ||
| 80 | Stainless Steel | A2-70 | Plain | In stock | 50 | 555.61 | ||
| 80 | Stainless Steel | A2-70 | Passivated | In stock | 50 | 555.61 | ||
| 80 | Stainless Steel | A4-80 | Plain | In stock | 50 | 555.61 | ||
| 80 | Stainless Steel | A4-80 | Passivated | In stock | 50 | 555.61 | ||
| 100 | Carbon Steel | Class 8.8 | Zinc Plated | In stock | 50 | 688.67 | ||
| 100 | Carbon Steel | Class 8.8 | Hot Dip Galvanized | In stock | 50 | 692.76 | ||
| 100 | Carbon Steel | Class 8.8 | Dacromet | In stock | 50 | 688.41 | ||
| 100 | Carbon Steel | Class 8.8 | Blackened | In stock | 50 | 688.00 | ||
| 100 | Carbon Steel | Class 8.8 | Phosphate | In stock | 50 | 688.00 | ||
| 100 | Carbon Steel | Class 8.8 | Plain | In stock | 50 | 688.00 | ||
| 100 | Stainless Steel | A2-70 | Plain | In stock | 50 | 695.01 | ||
| 100 | Stainless Steel | A2-70 | Passivated | In stock | 50 | 695.01 | ||
| 100 | Stainless Steel | A4-80 | Plain | In stock | 50 | 695.01 | ||
| 100 | Stainless Steel | A4-80 | Passivated | In stock | 50 | 695.01 | ||
| 120 | Carbon Steel | Class 8.8 | Zinc Plated | In stock | 50 | 825.78 | ||
| 120 | Carbon Steel | Class 8.8 | Hot Dip Galvanized | In stock | 50 | 830.57 | ||
| 120 | Carbon Steel | Class 8.8 | Dacromet | In stock | 50 | 825.47 | ||
| 120 | Carbon Steel | Class 8.8 | Blackened | In stock | 50 | 825.00 | ||
| 120 | Carbon Steel | Class 8.8 | Phosphate | In stock | 50 | 825.00 | ||
| 120 | Carbon Steel | Class 8.8 | Plain | In stock | 50 | 825.00 | ||
| 120 | Stainless Steel | A2-70 | Plain | In stock | 50 | 833.41 | ||
| 120 | Stainless Steel | A2-70 | Passivated | In stock | 50 | 833.41 | ||
| 120 | Stainless Steel | A4-80 | Plain | In stock | 50 | 833.41 | ||
| 120 | Stainless Steel | A4-80 | Passivated | In stock | 50 | 833.41 | ||
50 combinations shown
Matching components
Questions
Why is there no hot-dip galvanized option below M8?
The zinc layer is too thick for smaller threads, so hot-dip galvanizing starts at M8.
Order assurance
Packaging & delivery
- Bulk carton packing
- Small boxes with outer cartons
- Palletized shipment
- Fumigation-free pallets
- Inner poly bags
- Buyer branding and labels
