TaurusFix

Stud Bolt, Metal End 1d

Threaded at both ends with a plain shank between: one end screws into a tapped hole and stays there, the other takes a nut, so the part can come off without wearing the tapped thread. The screw-in end is one thread diameter long, for tapped holes in steel.


In stockShips within 3 working daysMade to orderShips within 15 working days

M24 × 3170 variants
LengthmmMaterialGradeFinishStockMOQpcs≈ kg/ 1,000 pcsQuantitypcs
80Carbon SteelClass 8.8Zinc PlatedIn stock50323.00
80Carbon SteelClass 8.8Hot Dip GalvanizedIn stock50323.00
80Carbon SteelClass 8.8DacrometIn stock50323.00
80Carbon SteelClass 8.8BlackenedIn stock50323.00
80Carbon SteelClass 8.8PhosphateIn stock50323.00
80Carbon SteelClass 8.8PlainIn stock50323.00
80Stainless SteelA2-70PlainIn stock50326.29
80Stainless SteelA2-70PassivatedIn stock50326.29
80Stainless SteelA4-80PlainIn stock50326.29
80Stainless SteelA4-80PassivatedIn stock50326.29
Need another length in M24?Made to order · ask for a price

170 combinations shown

Matching components

Questions

Why is there no hot-dip galvanized option below M8?

The zinc layer is too thick for smaller threads, so hot-dip galvanizing starts at M8.

Order assurance

Reports & inspection

  • EN 10204 3.1 material certificate
  • Dimensional inspection report
  • Certificate of conformity
  • Mechanical test report
  • Chemical analysis report
  • Coating inspection report
  • Batch and lot traceability

Packaging & delivery

  • Bulk carton packing
  • Small boxes with outer cartons
  • Palletized shipment
  • Fumigation-free pallets
  • Inner poly bags
  • Buyer branding and labels
Quote list0 lines

Your list is empty.